IPCMini Ion Pump Controller

The Agilent IPCMini is a modern 1/4-rack ion pump controller with 3.5” touch screen display. The IPCMini can operate pumps up to 500 L/s pumps with 40W of power. With I/O response time of <30 msec (typical) and 1 nA of current resolution, it is suitable when a quick trigger and an accurate pressure reading are required, even at low pressure. The Intelligent Step (iSTEP) voltage function selects the proper operating voltage to start even large pumps at low pressure and maintain accurate pressure readings in UHV/XHV region.

The HV button and interlock make IPCMini safe and reliable. The resistive touch panel has an intuitive display that can be easily read from a distance.

Product details Related Product


  • Selection of positive (diode, noble diode) or negative (StarCell, triode) polarity outputs to meet your needs
  • iSTEP voltage feature ensures highest pumping speed and lowest leakage current resulting in most accurate pressure measurement down to the 1 x 10–10 mbar range
  • Convenient front-panel USB port for data acquisition
  • Programmable outputs for operation of any other ion pump
  • I/O response time of <30 msec (typical)
  • Built-in set points, remote operation, and RS232/485 computer interface are standard (Ethernet optional)
  • IProtect disables high-voltage output in the event of a leak or increase in gas load to preserve ion pump lifetime
  • Interlock system immediately shuts down the high voltage when the plug is removed from the pump
  • Compliant with EN 61326-1 2013 and EN 61010-1 2010
  • Shipped without a power cord, to be ordered separately


Communications Interface
  • RS232
  • RS485
  • Ethernet
Current Measurement Range
  • 1 nA to 20 mA
Current Resolution
  • 1 nA
Dimensions (WxHxL)
  • 106.4 mm x 129.4 mm x 245 mm
  • Touchscreen
HV Connector
  • SHV
  • Fischer
  • 129.4 mm
Input Frequency
  • 50 / 60 Hz
Input Voltage
  • 100-240 Vac or 24 Vdc
  • 245 mm
Maximum Input Power
  • 160 VA
Maximum Output Power
  • 40 W
Modes of Operation
  • Local
  • Serial
  • Remote
Operating Environment Relative Humidity
  • 90 % maximum non condensing humidity
Operating Environment Temperature
  • 0° C to 45° C
Output Current – Short Circuit
  • 20 mA
Output Voltage
  • 7 kV
Standards and Certifications
  • EN 61010-1 2010
  • EN 61326-1 2013
  • 2 kg
  • 106.4 mm



Chat zalo
Chat messenger
Liên hệ chúng tôi