VHS-10 Diffusion Pump

Available in 4-inch, 6-inch, 250-mm, 10-inch, and 400-mm sizes, the VHS series pumps are the fastest and cleanest diffusion pumps of their size available today. The VHS series patented Bulge Contour doubles gas capture and maintains lower pressure. All VHS series pumps have sight glass/fill and drain assemblies for continuous monitoring and easy maintenance of pump fluid. Finned boilers increase surface area, prolonging pumping fluid life. Full thermal protection and quick-cool coils are also standard. The 4-inch, 6-inch, and 10-inch pumps can be ordered with ASA or ISO flanges, standard or extended cold caps, and a variety of voltages.

Category: Diffusion Pumps

Product details Related Product

Product Details

Features

Highest pumping speed available
Fluid-level sight glass provides a quick indication of pump fluid status at all times
Fill and drain assembly for pump oil
Fractionating jet purifies pumping fluid
High tolerable forepressure
Full thermal protection
Stainless steel pump body

Specifications

Pumping Speed, Operating Range Pumping Speed, AVS 4.1 (1963)	3,650 l/s Air, 4,560 l/s He/H₂ 5,300 l/s Air
Maximum Throughput	6.3 T-l/s (8.4 mbar l/s) in operating range 7.5 T-l/s (10.0 mbar l/s) @ 0.01 torr
Operating Range	1.7 x 10^-3 to <5 x 10^-9 torr at 4400 W (2.3 x 10^-3 to <6.5 x 10^-9 mbar)
Maximum Forepressure	No Load: 0.65 torr (0.85 mbar) Full Load: 0.55 torr (0.72 mbar)
Recommended Backing Pump	≥ 30 cfm (51 m³/hr)
Backstreaming Rate, Standard Cold Cap	<5.0 x 10^-4 mg/cm²/min
Warmup Time	15 minutes
Cooldown Time	25 minutes
Fluid Charge	1,000 cc
Electrical Requirements	3 ph, 50/60 Hz, 208/240/380/480 VAC
Pump Power	4400 watts
Cooling Water Requirements	0.40 gpm (80 l/hr)
Water Connections	1⁄8 in. FPT Tee