HS-16 Diffusion Pump

Available in 2 in. and 16 in. through 35 in. sizes, the low-cost HS-series pumps provide high speed, low ultimate pressure, high throughput, high tolerable forepressure, and low backstreaming. The HS-Series diffusion pumps come with full thermal protection and optional quick-cool coils. The 16 in. through 35 in. pumps come with sight glass/fill and drain assemblies, and are available with ASA or ISO flanges.

Category:
Product details Related Product

Features

  • Five-stage fractionating jet purifies pumping fluid
  • High throughput, 9600-watt version available
  • High tolerable forepressure
  • Full thermal protection
  • Fill and drain assembly for pump oil
  • Fluid-level sight glass provides quick indication of pump fluid status at all times
  • Standard gauge port (NW-25) below inlet flange included
  • Foreline baffle prevents loss of fluid into backing pump system
  • Optional halo baffle reduces backstreaming without adding height
  • Optional quick cool coil

Specifications

Pumping speed, operating range 6,000 l/s air, 7,500 l/s He and H2
Pumping speed*, AVS 4.1(1963) 10,000 l/s air
Maximum throughput 8,100 W – 9.5 T-l/s (12.7 mbar l/s) in operating range13.5 T-l/s (18.0 mbar-l/s) @ 0.01 Torr
9,600 W –12.0 T-l/s (16 mbar l/s) in operating range 11.5 T-l/s (15.3 mbar-l/s) @ 0.01 Torr
Operating range 2 x 10-3 to <5 x 10-8 Torr at 9,600 W (1.3 x 10-3 to <6.5 x 10-8 mbar)
Maximum forepressure No load – 0.65 Torr (0.85 mbar), Full Load – 0.55 Torr (0.72 mbar)
Pump power 8100/9600 watts
Recommended backing pump ≥ 80 cfm (136 m3/hr)
Backstreaming rate**, standard cold cap <1.5 x 10-3 mg/cm2/min
Warmup time 30 minutes
Cooldown time 48 minutes (30 minutes with optional quick cool coil)
Fluid charge 3 quarts (2.8 liters)
Electrical requirements 3 ph, 50/60 Hz, 240/415/480 VAC
Cooling water requirements 1.5 gpm (300 l/hr) at 60-80 °F (15-26 °C)
Water connections 1⁄4 in. FPT Tee
Recommended fluid DC-704

Video

Video

Chat zalo
Chat messenger
Liên hệ chúng tôi