Product - NHS-35 Diffusion Pump

NHS-35 Diffusion Pump (3)
NHS-35 Diffusion Pump (1)
NHS-35 Diffusion Pump (2)

NHS-35 Diffusion Pump

Available in 2 in. and 16 in. through 35 in. sizes, the low-cost HS-series pumps provide high speed, low ultimate pressure, high throughput, high tolerable forepressure, and low backstreaming. The HS-Series diffusion pumps come with full thermal protection and optional quick-cool coils. The 16 in. through 35 in. pumps come with sight glass/fill and drain assemblies, and are available with ASA or ISO flanges.


Features

  • Five-stage stainless steel fractionating jet purifies fluid.
  • High tolerable forepressure.
  • Full thermal protection.
  • Fluid-level sight glass provides quick indication of pump fluid status at all times.
  • Foreline baffle prevents fluid loss to backing system.
  • Optional halo baffle cold cap reduces backstreaming without adding height.
  • Standard gauge port (NW-25) below inlet flange included.
  • Optional quick cool coil.

How it works


Technology


Specifications

Pumping Speed, Operating Range Pumping Speed, AVS 4.1 (1963) 28,000 l/s air, 35,000 l/s He and H2

50,000 l/s Air

Maximum Throughput 25 T-l/s (33 mbar l/s) in operating range, 35 T-l/s (45 mbar-l/s) @ 0.01 torr
Operating Range 9 x 10-4 to < 5 x 10-8 torr (1.2 x 10-3 < 6.5 x 10-8 mbar)
Maximum Forepressure No Load – 0.55 torr (0.71 mbar), Full Load – 0.40 torr (0.52 mbar)
Recommended Backing Pump ≥ 300 cfm (510 m3/hr)
Backstreaming Rate, Standard Cold Cap <5 x 10-4 mg/cm2/min
Warmup Time 60 minutes
Cooldown Time 180 minutes
Fluid Charge 3 U.S. gallons (11.3 liters)
Electrical Requirements 3 ph, 50/60 Hz, 240/415/480 VAC
Pump Power 24,000 watts
Cooling Water Requirements 4 gpm (800 l/hr) at 60-80°F (15-26°C)
Recommended Fluid DC-704

Literature